1. Technical parameters
- Material: carbon steel, stainless steel, low alloy steel.
- Blank specification: ≤4.0mm, Width≤420mm, Coil ID:φ508mm, Max
- Products specifications: ≥0.6×400, Coil ID: φ508, Max coil OD:φ1500
- Rolling force: p≤400T.
- Rolling speed: ≤150m/min.
2. Component and parameters
a. Mainframe specifications: φ185/φ460×500 Four roll reversible
cold rolling mill.
b. Transmission way: working roller drive.
c. Press device:
Press motor: power 15KW×2, 6 class.
High-speed gear box: WS210, I=41, center distance A= 210mm.
Low-speed gear box: second enveloping worm gear and worm, center
distance A= 315mm, Mn=14.5mm I=40.
Press screw: S160×6, press speed:0.058mm/s
Press box: steel castings
Two sets closed arch, column section 250 x 350, ZG35.
Windows boarding: overall processing, manual stroke
d. Roller parts:
Working roller* width of the roller: φ185×500mm, Material: 9Gr2Mo
Bearing: compound tiles needle bearing
Support roller* width of the roller: φ460×470mm, Material: 9Gr2Mo
Bearing: FC special bearings for rolling machine. Bearing
lubrication way: grease lubrication.Roller change way: hydraulic
change support roller.
e. Main transmission parts: Main motor type: Z4-355-12 series DC
motor, P=355KW, 750/1500r/min, 440V 877A
Main reducer: ZDY450, I=5.6
Gear box: center distance A= 230mm, Mn=10mm.
Reducer, the box lubrication way: thin oil splashed lubrication.
Transmission shaft type: special metallurgy cross gimbal pick axis
Base: fission steel structure welding parts.
3. Tension winder: Four pyramidhydraulic winder (2 sets)
a. Reel diameter: φ508×500.
b. Inflation/ reduction capacity: ≥25mm (φ485~φ510).
c. Hydraulic push, hydraulic small car, hydraulic inflation/
d. Max coil weight: ≤6000kg.
e. Tension: T≤3000kg.
f. Main motor:Z4-250-42series DC motor, 160KW, 1000/2000r/min,
g. Deceleration machine:ZQ750 I=15.75. .
4. Thickness gauge: QNT-2 type Ray Thickness Gauge (user
5. Electrical control system:
a. Use eurotherm electric company original European 590 system.
Relay control system adopts PLC, tension participation. Coil
diameter changes with constant tension control and implement track,
with operate box, current and speed, tension, thickness of digital
display, it has the function of protection.
b. By Siemens electrical appliances
6. Processing lubrication station (user self-provided)
Lubrication station is mainly to roll the lubrication system and
rolling steel belt lubrication system, cooling lubrication pump
station, including medium for emulsion lubrication.
7. Wearing parts and information:
- Supply parts list provided.
b. Provide equipment instructions and control principle diagram
8. Installation and commissioning:
a. For months to advance the provision of equipment installed base
map, forming the basis for the implementation of the second
b. Equipment to the scene after the party responsible for the
φ185/φ460×500 Four roll reversible cold rolling mill
Frame sectional area 250×350mm, assembles.
Including the press motor, 1 class worm gear box WS210, 2 class 315
worm gear reduction box, press nut, screw, coupling and base.
Including the work roll*2, supporting roller*2 and bearings,
bearing blocks, linings, window boards, roll balance .etc.
Main transmission parts
Including the Main Motor (Z4 DC, P = 355kw), main reducer, ZLY450,
teeth box, universal joint cross shaft SWC200, coupling and so on.
Split-type steel welding plate.
Include base, spindle, cylinder, couplings etc
ZQ85 modified box, box homemade
Feeding small car
Up-down/ back-forth lifting/ moving, oil pump, track.
Hydraulic pressure station
Including the accumulator, contact monometers, unloading equipment,
relief valve, filter device, the system pressure shunt etc.
Electric control system
Including electric cabinet, the operation box etc., using 590
control, controlled by PLC
Thickness gauge (user self-provided)
QNT- 2 type I rays.